Accton Wireless Broadband Corp. FIU176205T01W User Manual

  |  Installing the Gateway Router

Bridge Mode Connections

–  36  –

 Use ONLY the power adapter supplied with the Wireless 

Broadband Router. Otherwise, the product may be damaged.

When you power on the Wireless Broadband Router, verify that the 

Power LED turns on and that the other LED indicators start functioning 

as described under see 

.

Set up wireless devices by pressing the WPS button on the Wireless 
Broadband Router or by using the web interface. 

 for more information on accessing the web 

interface.

In Bridge Mode, the Wireless Broadband Router operates as a wireless 

access point, extending a local wired network to associated wireless clients 

(PCs or notebooks with wireless capability). From any nearby location, you 

can then make a wireless connection to the Wireless Broadband Router and 

access the wired network resources, including local servers and the 

Internet.

In Bridge Mode, the Wireless Broadband Router does not support gateway 

functions on its WAN port. Both the LAN port and the WAN ports can be 

connected to a local Ethernet LAN. 

 Bridge Mode is not the factory default mode and must be manually 

set using the web management interface.

To connect the Wireless Broadband Router for use as an access point, 

follow these steps:

4.

Set up wireless
devices

Notebook PC

2.

Connect AC power
adapter to
power source

3.

Connect LAN port
to PC

1.

Connect LAN and WAN
ports to an Ethernet LAN
switch or PCs