Accton Wireless Broadband Corp. FIU176205T01W User Manual

–  95  –

 

◆

Check that your computer is properly configured for TCP/IP.

◆

Make sure the correct network adapter driver is installed for your PC 

operating system. If necessary, try reinstalling the driver.

◆

Check that the network adapter’s speed or duplex mode has not been 

configured manually. We recommend setting the adapter to auto-

negotiation when installing the network driver.

Check the following items before you contact local Technical Support.

If the Gateway Router cannot be configured using a web browser:

■

Be sure to have configured the Gateway Router with a valid IP 

address, subnet mask and default gateway.

Power/LAN LEDs are off

◆

The AC power adapter may be disconnected. Check 

connections between the Gateway Router, the power adapter, 

and the wall outlet.

WLAN LED is off

◆

The access point radio has been disabled through it’s web 

management interface. Access the management interface 

using a web browser to enable the radio.

LAN LEDs are off 

(when port connected)

◆

Verify that the Gateway Router is powered on.

◆

Be sure cables are plugged into both the Gateway Router and 

corresponding PC.

◆

Verify that the proper cable type is used and its length does 

not exceed specified limits.

◆

Check the cable connections for possible defects. Replace the 

defective cable if necessary.

WAN LED is off

◆

There is no detected signal from WAN port. Check 

connections and the management interface.