Accell K088B-001B Leaflet

Introduction:  
The Accell UltraAV DisplayPort to DisplayPort multi-monitor adapter allows you to connect up to three DisplayPort monitors 

using only one DisplayPort connector on your graphics card. Once connected, you have the freedom to configure the 

monitors as a single unified display (expanded mode), or three identical displays (clone mode) by simply changing the 

output resolution of your graphics card. This adapter is plug-and-play-ready, requiring no additional software or driver.       
 

-Fully HD compatible supporting resolutions up to 3840x1024/60Hz/32bit color. 
-No additional software to install, just Plug-and-Play. 

-Works with any desktop or notebook computer (PC or Mac) that has a DisplayPort output. 

-Designed to work with monitors that have DisplayPort input, and it works best if the monitors are of the same native 
resolution, up to 1280x1024 per monitor.  

-If monitors are of different native resolutions, the adapter will display at a resolution common to the monitors. 

-If your graphics card has two DisplayPort ports, they can output to six monitors with two of these adapters!  

 
Specifications: 

• Connectors: Built-in 45” locking DisplayPort cable (to video card) 

•  3 DisplayPort outputs (to monitors) - DisplayPort cables not included 

• Max resolution: 3 monitors @1280x1024/60Hz/32bit color (3840x1024)* 

    

 

 

 

• Latency: Near zero**  
• Approximate dimensions: 6.5"(W) x 4"(L) x 1.5"(H)  

• Power: Bus-powered via video card 

• DisplayPort 1.1a compliant 

• Maximum supported monitor frequency: 60Hz 

 

 

 
 

*Recommended: Same type DisplayPort monitors used, having the same native resolution, not exceeding 60Hz refresh rate. 
**Features are subject to the capabilities of the computer and graphics card specification.  

Follow the steps below to install the DisplayPort-to-3xDisplayPort adapter. It is recommended that monitors have the native 
resolution (up to 1280x1024) and refresh rate (up to 60 Hz).  

 

™

™

• DP to 3x DP Monitors Adapter 

• Instructions

 

•DisplayPort video card and DisplayPort 
monitors** 

•Microsoft® Windows® 7, Windows Vista™ 

(32/64bit), Windows XP   (32/64bit), 
Windows Server 2003/2008 (32/64bit), 

Windows 2000

 

•DisplayPort video card and DisplayPort 
monitors** (note: mini DisplayPort video card 

requires Mini-DP to DP adapter - not included)  

•Mac® OS X v10.4, Mac OS X v10.5, Leopard 

(32/64bit) 

Step 1: Connect integrated DisplayPort 

(DP) input cable to desktop or notebook 
graphics card connector.  

Step 2: Connect DisplayPort output 

ports 1, 2 and 3 to up to three 
monitors respectively, according to 

the monitors’ display sequence. 

Step 3: Select monitors’ input

port to DP

1

. You will either 

see the same image on all 

monitors (clone mode) or a 

single image spread across 
multiple monitors (expanded 

mode). 

 
Step 4: To change the display to 

clone mode, change the output 
resolution on your computer and 

select the horizontal resolution 

equivalent to native resolution (or 
lower) for one (1) of the monitors 

i.e.  1280x1080 (horizontal x 

vertical) 

Step 1: Connect integrated DisplayPort 

(DP) input cable to desktop or notebook 
graphics card connector.  

Step 2: Connect DisplayPort output 

ports 1, 2 and 3 to up to three 
monitors respectively, according to 

the monitors’ display sequence. 

Step 3: Select monitors’ input

port to DP

1

. You will either 

see the same image on all 

monitors (clone mode) or a 

single image spread across 
multiple monitors (expanded 

mode). 

 
Step 4: To change the display to 

expanded mode, change the output 
resolution on your computer and 

select the horizontal resolution 

equivalent to three times the native 
horizontal resolution of one monitor 

i.e. 3840x1080 (horizontal x 

vertical).