ATEC AV370A User Manual

●

The picture shakes, lines appear, and
audio is unstable.

●

The remote controller does not work.

Check whether the TV signal is receiving
interference from other radio waves or
devices.
Check whether the TV signal is receiving
interference from automobiles, high-
voltage cables, airplanes, neon
signboards and so on. Change the
antenna direction if necessary.

Check whether the batteries are dead or
installed incorrectly.

Check whether the receiver on the LCD
TV unit is masked. Ensure it is facing in
the correct direction.

●

Stereo audio is unclear or discontinuous.

If the broadcasting station is too far away
or the TV is getting interference from other
radio waves, the stereo audio may not be
clear. In this case, press the <SSM>
button.

●

The LCD TV is making cracking
sounds.

When the LCD TV is turned on or off,
cracking sounds may be heard. This
happens because the cabinet contracts
or expands due to environmental factors,
including humidity and temperature.
There are no adverse effects on the TV’s
performance.

●

When playing VCR, there is no video.

Check whether the VCR is set to a
dedicated VCR channel (3 or 4), and the
input mode for the TV is set to video
mode.

Check the video cable connection
between the VCR and TV.

A-7