Gempack Co. Ltd. TC7530 User Manual

 

 

#584 Sangwhal-ri, Kanam -myon,  
Yoju-kun, Kyounggi-do, 
469-885,  Korea                                                                                                                                                                                                  58 of 83 

Operating the TeleCLIENT TC7530 includes using the TeleCLIENT Connection 
Manager to set up network connections, and the hot key combinations to switch 
between active sessions. This chapter explains how to use the TeleCLIENT 
Connection Manager and operation hot keys.  

It includes the following sections: 

• 

Powering On 

• 

Using the TeleCLIENT Connection Manager 

• 

Connecting to a Network Server 

• 

Using the TeleCLIENT TC7530 Hot keys 

• 

Logging Off 

The TeleCLIENT TC7530 Windows-based terminal is powered by an AC to DC adapter, 
which connects to the rear panel DC-in jack.  Notice the ON/OFF switch located on the 
front panel (refer to Hardware Installation). Use this switch to power the TeleCLIENT 
TC7530 on and off. 

To power-off the TeleCLIENT TC7530, press the ON/OFF switch.  To re-start, press the 
ON/OFF switch briefly. 

WARNING: FOLLOW THE INSTRUCTIONS ABOVE CAREFULLY TO AVOID 
ACCIDENTAL POWER SHUT-OFF TO THE TELECLIENT TC7530. 

The TeleCLIENT Connection Manager allows a user to create and manage 
TeleCLIENT TC7530’s network connections.  Whenever the TeleCLIENT TC7530 starts 
up, the TeleCLIENT Connection Manager window automatically displays (

Figure 5.1

) 

unless it is an initial start up or ‘auto-start connection’ was set by a user.  This window 
will also appear whenever user logs off or disconnect from a session.