Baumer Electric AG OIS-W-WR300303 User Manual
Baumer Ident AG
63 / 64
Author: Clemens Zehnder
File: Maintenance-SW.doc Version 3.0 e
6 If you have a Problem
The following enumeration list is constantly updated.
•
The Service Software Basic (S01 doesn’t start up correctly and indicates the following error
message:
error: can’t set serial port settings
message:
error: can’t set serial port settings
⇒
Please check the correct spelling (capital letters) in the instruction line:
Develop.exe COM1 BAUD115200
Develop.exe COM1 BAUD115200
•
The Service Software Basic (S01 starts up correctly but the communication to the reader (R
)
doesn’t establish itself.
⇒
Activate the interface on your PC.
(Control panel \ System \ device manager \ LPT and COM devices)
(Control panel \ System \ device manager \ LPT and COM devices)
•
The red LED system failure 1 (R12) shines constantly after start up
⇒
You have the possibility to reset the reader (R
)
with the keystroke on „r“ on your PC. Or you can just
switch off and on the reader (R
)
with the mains switch (R35. If the system failure 1 (R12) is still on, the
reader (R
)
has a problem which cannot be fixed by the user. Please contact us.