Feig Electronic GmbH CPR5010 User Manual

The ID MAX50.10-E is a member of the OBID

®

 classic-pro reader family and supports transponder

chips according ISO/IEC 14443 type A and type B as well as transponder chips according ISO/IEC
15693 and is able to communicate with NFC devices.

Because of it's Ethernet interface according 10BASE-T / 100BASE-T standard the ID MAX50.10-E
is well suited for easy integration in an existing LAN environment. The integrated power over
Ethernet (PoE) power supply guaranties a maximum on reliability and easy installation with stan-
dardized PoE power supply's.

The ID MAX50.10-E can work in polling mode or in notification mode which reduces the necessary
data traffic with the reader to a minimum. In notification mode the host will be informed by a notifi-
cation message if a transponder was detected by the reader and can start the further data ex-
change with this transponder if required.If the reader ID MAX50.10-E shall be used to switch a re-
lay or to monitor digital inputs the remote I/O-board (ID CPR.I/O-A) can be connected to the
reader. The remote installation of the relay guarantees a maximum on security if the relay shall
switch e.g. a door opener, because it can placed at the interior of the building.
Optionally the reader ID MAX50.10-RE with one internal relay can be used.

PoE Power Supply

(IEEE802.3af)

Ethernet

Ethernet

ID CPR.IO

ID CPR50.10-E

Door Contact

X3

4
3
5
6

Fig. 1: Installation diagram for ID MAX50.10-E with optional I/O extension board ID CPR.I/O-A