General Dynamics Broadband Inc. P1DKF2 User Manual
P1D Broadband Module Integration
21 March 2001 Proprietary Information Page 11 of 11
5 Regulatory
Information
5.1
Compliance with FCC Rules and Regulations
The IPWireless P1D Broadband module is certified against FCC Part 27 for operation in the 2496-
2690MHz frequency allocation. The module is certified under FCC ID: PKTP1DKF2 and is only
certified for use with either an integral or external antenna, the maximum antenna gain allowed is
defined on the FCC Grant of Certification.
2690MHz frequency allocation. The module is certified under FCC ID: PKTP1DKF2 and is only
certified for use with either an integral or external antenna, the maximum antenna gain allowed is
defined on the FCC Grant of Certification.
If the FCC ID is not visible from outside of the host device, then an additional label is required on
outside of the host device stating ‘Contains FCC ID: PKTP1DKF2’
outside of the host device stating ‘Contains FCC ID: PKTP1DKF2’
IMPORTANT: Manufacturers of devices containing the IPWireless P1D Broadband module are
advised to
advised to
1. Clarify any regulatory questions.
2. Have their final product tested and approved for FCC compliance.
3. Include instructions with the final product regarding meeting RF Exposure requirements of the
FCC rules.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Caution: Changes or modifications not covered in this manual must be approved in writing by the
Manufacturer. Changes or modifications made without written approval may void the user’s authority
to operate this equipment.
Manufacturer. Changes or modifications made without written approval may void the user’s authority
to operate this equipment.
5.2
Exposure to Radio Frequency Signals
To comply with the FCC RF exposure rules, the UE P1D wireless broadband modem has been
evaluated against the Maximum Permissible Exposure (MPE) limits defined in Section 1.1310 of the
FCC rules for the uncontrolled environment. During normal operation, all persons should maintain a
distance of at least 20cm from the antenna to ensure compliance with the MPE limits.
evaluated against the Maximum Permissible Exposure (MPE) limits defined in Section 1.1310 of the
FCC rules for the uncontrolled environment. During normal operation, all persons should maintain a
distance of at least 20cm from the antenna to ensure compliance with the MPE limits.