Tripp Lite OMNI1500LCD User Manual

Input circuit breaker

10A

UPS Input cord length
(ft.)

UPS Input cord length
(m)

1.8

Recommended
Electrical Service

15A 120V

BATTERY

Full load runtime
(minutes)

2.5 min. (825w)

Half load runtime
(minutes)

9 min. (413w)

DC system voltage (VDC)

Battery recharge rate
(included batteries)

Less than 3.5 hours from 10% to 90%

VOLTAGE REGULATION

Voltage regulation
description

Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 75 to 147

Overvoltage correction

Input voltages between 128 and 147 are reduced by 12%

Undervoltage correction

Input voltages between 93 and 107 are boosted by 14%

Severe undervoltage
correction

Input voltages between 75 and 92 are boosted by 30%

LEDS ALARMS & SWITCHES

LED Indicators

Front panel LCD display

Front panel LCD display

Backlighted LCD screen indicates input voltage, 5-bar battery charge level, overload, AVR, on battery and
replace battery status; LCD screen rotates for rack/tower viewing

Alarms

Audible alarm indicates power-failure and low-battery conditions

Alarm cancel operation

Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate
low-battery status

Switches

2 Switches control off/on power status and alarm-cancel/self-test operation; dimmer switch controls LCD
brightness

SURGE / NOISE SUPPRESSION

UPS AC suppression
joule rating

420

UPS AC suppression
response time

Instantaneous

UPS Dataline
suppression

1 line TEL/DSL (1 in / 1 out); 10/100Base T Ethernet

EMI / RFI AC noise
suppression

Yes

PHYSICAL

Installation form factors
supported with included
accessories

4 post 19 inch rackmount (mounting kit included); 2 post 19 inch rackmount (mounting kit included); Tower

Included mounting
accessory description

Pair of mounting ears enable tower and 2-4 post rackmount installation