Triton RAB-PO-X68-XN User Manual

1 0 0 0 1 1 1 1 0

 0 0 1 0 1 1

  • 19“ special cabinet to soffit with IP 30 protection
  • Cabinet is to be hanged into a soffit. 
  • Welded frame with a pop-up frame with a span of 19“
  • Cabinet construction:
    – compact welded cabinet
  • Min. thickness of the surface finish is 65 µm.
  • Cabinets  are  intended  for  installation  of  data  and  telecommunication  devices  and  their 

distribution systems.

  • The frame of the cabinet and the pop-up frame are connected with earthing cables that have 

to be properly fixed and inserted into connectors during all the time when using the cabinet.

  • There is one M8 screw placed on the bottom part of the cabinet as an earthing main point.

  • Operation environment:
    – office
    – the cabinet is not intended for outdoor installations and for installations in environment 

that can influence negatively the functionality of the cabinet and the mounted devices 
(e.g. environment with danger of explosion or humid and wet surroundings)

  • Must be protected against:
    – mechanical damage
    – improper manipulation
    – a different usage than the cabinet is intended for
  • Improper manipulation is especially:
    – overloading (maximum recommended load exceeding)
    – device installation that can influence negatively operation and function of the cabinet or 

the installed equipment

    – change of the construction or design of the cabinet

  • This cabinet type is to be hanged into a soffit using drawbar hooks (included in the supply).
  • To secure the maximum recommended load, it is necessary to fix the cabinet in a soffit of 

appropriate carrying capacity and to distribute the installed loading in the cabinet equally.

  • All parts are made of recyclable materials and after its discard, it is necessary to dispose the 

cabinet according to valid regulations.

  • This product is fully in accordance with ČSN eN 62208 (357040), (eN 62208:2003), 

(idt IeC 62208:2002)