Contec DS110-APL User Manual
Settings
FX-DS110-APL
28
Setting Descriptions
Edit
Access Point
Giving a name to an access point makes it easier to identify on the
network.
network.
Names may be up to 32 characters. A maximum of 1024 names
may be entered.
may be entered.
Base
IP Address
Enter the IP address of the home station. This is written on the
seal on the bottom of each unit at the factory. This setting is not
necessary to use the APL as a wireless device, but if it is used in
combination with APE, or if the APL is accessed through different
routers, the IP address must be entered.
seal on the bottom of each unit at the factory. This setting is not
necessary to use the APL as a wireless device, but if it is used in
combination with APE, or if the APL is accessed through different
routers, the IP address must be entered.
Factory setting: A unique value is assigned using the lower 3 bytes
of the 6-byte APL Ethernet address.
(Example)
Ethernet address
IP address
[00-80-4C-01-02-03]
→
[10.1.2.3]
[00-80-4C-0D-0E-0F]
→
[10.13.14.15]
The initial '10' is common to all settings.
Subnet Mask
If a subnet is used, enter the subnet mask number.
Factory setting: [255.0.0.0]
Default Gateway
This setting determines the IP address of the network router to
which this unit belongs.
which this unit belongs.
Factory setting: [0.0.0.0]