Contec DS540-APDLAP User Manual
8. Appecdix
FX-DS540-APDL-U
67
8. Appecdix
Factory Default Settings List
Hardware Setup
- FX-DS540-APDL-U
switch1 :
OFF
switch 2
: OFF
ON
1 2
Figure 8.1. DIP Switch
Initial setup
Table 8.1. Initial setup list (1/4)
Setting item
Setting contents(First default)
<Base
setting>
Host name (Enter a string of up to 16 single-byte
alphanumeric characters.)
(Blank)
DHCP client
Disable / Enable
IP address (When disabled setting of DHCP client sets :
enable)
Seal on the back of housing
Subnet
mask
255.0.0.0
Default
gateway
0.0.0.0
Access point construction
Compatible, Integrated
Access point type
Normal, Master, Backup
IP of master AP (It is set when normal or backup)
0.0.0.0
IP of backup AP (It is set when normal or backup)
0.0.0.0
Language setting
Japanese, English
Password (single-byte alphanumeric characters can be
up to 31 characters long and .the password is case
sensitive.)
sensitive.)
(Blank)
<Ethernet>
Port
speed
Recognization automatically, 100M/full, 100M/half duplex,
10M/full, 10M/half duplex
10M/full, 10M/half duplex
Link
down
sense
Disable, Enable (corresponding to 5/2.4GHz only when unit
type access point.
type access point.
11g:
The function when selecting IEEE802.11g.
AP:
The function when unit type is access point.
ST:
The function when unit type is station.