Contec DS540-APDLAP User Manual
8. Appecdix
70
FX-DS540-APDL-U
Table 8.1. Initial setup list (4/4)
Setting item
Setting contents(First default)
< Extensions >
Bridge Packet Control (MAX 32 entries)
Disable, Enable [List edit : MAX 32 entires]
Network time, function
Disable, Enabled
Network time, IP address
(IP address of network time server)
Network time, time zone
+09:00 (Japanese time zone is between +09:00.)
Access
control
Access control, TELNET
Enabled, Disable
Access control, FTP
Enabled, Disable
Access control, WEB server
Enabled, Disable
Access control, administrator IP
Disable, Enabled
Access control, administrator IP address1
0.0.0.0
Access control, administrator IP address2
0.0.0.0
<Terminal>
Baud rate
9600, 1200, 2400, 4800, 19200, 38400, 57600, 115200
<SNMP>
SNMP agent function
Disable, Enabled
Community name (Single-byte alphanumeric
characters can be up to 32 characters long and .the
password is case sensitive.)
password is case sensitive.)
public
Access permission
Read/Write, Read Only
Trap destination IP address (1 point)
0.0.0.0
Administrator contact information (sysContact)
(Blank), (The string can be up to 32 characters long when all the
characters are single-byte characters or up to 16 characters long
when they are all double-byte characters.)
characters are single-byte characters or up to 16 characters long
when they are all double-byte characters.)
Device location (sysLocation)
(Blank), (The string can be up to 32 characters long when all the
characters are single-byte characters or up to 16 characters long
when they are all double-byte characters.)
characters are single-byte characters or up to 16 characters long
when they are all double-byte characters.)
Device name (sysName)
(Blank), (The string can be up to 32 characters long when all the
characters are single-byte characters or up to 16 characters long
when they are all double-byte characters.)
characters are single-byte characters or up to 16 characters long
when they are all double-byte characters.)
<Log
function>
Log function
Disable, Enabled
Overwriting mode
Enabled, Disable
Beginning day/time setting
Beginning day/time setting function
Disable, Enabled
Beginning day/time setting Beginning day/time
Year Month Day Time Minutes
Log setting in detail log-in
ON, OFF
Log setting in detail log-out
ON, OFF
Log setting in detail log-in rejection
ON, OFF
Log setting in detail Roaming
ON, OFF
11g:
The function when selecting IEEE802.11g.
AP:
The function when unit type is access point.
ST:
The function when unit type is station.