RadioFrame Networks Inc DH2 User Manual

Method of Procedure

RFN_3.1 Beta

List of Figures

Figure 1

The RadioFrame Networks iDEN/802.11b solution consists of the iDEN
Interface, the RadioFrame System, a Power Plant, and the customer’s
Local Area Network. ..................................................................................... 7

Figure 2

The iSC-3 functional diagram. ...................................................................... 8

Figure 3

Environmental Alarm System functional diagram. ...................................... 10

Figure 4

The RadioFrame System uses a ‘tree’-style architecture to connect
components. ............................................................................................... 12

Figure 5

NCU functional diagram. ............................................................................ 13

Figure 6

ACU functional diagram.............................................................................. 13

Figure 7

RFU functional diagram.............................................................................. 14

Figure 8

iDEN RadioBlade functional diagram. ........................................................ 15

Figure 9

RadioFrame Access Point (RAP) functional diagram................................. 15

Figure 10

RFS and customer LAN functional diagram. .............................................. 17

Figure 11

A typical RadioFrame System iDEN/802.11b installation........................... 19

Figure 12

The main rack houses the iDEN interface, the NCU and one ACU of the
RadioFrame System, and the Power Plant. ............................................... 20

Figure 13

RFUs are located throughout the building to provide coverage.................. 21

Figure 14

RadioBlade and RAP antennas must point straight down to the ground.... 22

Figure 15

Telco (T1/E1) interface with the iDEN/802.11b RFS. ................................. 38

Figure 16

T568B standard. ......................................................................................... 54

Figure 17

Standard 19" 7’ rack configuration and power requirements for the
RadioFrame System................................................................................... 59

Figure 18

Environmental Alarm Block ........................................................................ 66

Figure 19

Mount the ACU only in an EIA-standard compliant 19” rack. ..................... 69

Figure 20

Connect Port 1 on the front of the ACU to the specified port (1-8) on the
back of the NCU. Connect RFUs to Ports 1-8 on the back of the ACU. ..... 70

Figure 21

The URU can be placed or mounted on any flat surface............................ 71

Figure 22

The URU dip switch is located on the bottom of the unit and is used to
configure the input and output power for the unit. ...................................... 72

Figure 23

A wall mount requires two screws to anchor the RFU. ............................... 73

Figure 24

Use the provided bracket when mounting an RFU on the ceiling,
ensuring that all bolts or screws penetrate wood........................................ 74

Figure 25

Connect the RFU to the ACU, then ensure that the RFU is receiving
power and connectivity from the ACU. ....................................................... 75