RadioFrame Networks Inc DH2 User Manual
RadioFrame System
Connecting to the Customer LAN
RFN_3.1 Beta
111
6.3 Configuring an Individual RAP
RadioFrame Access Points (RAPs) provide the 802.11b wireless interface
between the RFS and the corporate local area network (LAN). Typically, all RAPs
in the RFS are configured at one time using the 802.11 Global Configuration
options. These global settings can be overridden by changing configuration
information for individual RAPs. Individual RAPs can also be isolated from further
global changes as well.
between the RFS and the corporate local area network (LAN). Typically, all RAPs
in the RFS are configured at one time using the 802.11 Global Configuration
options. These global settings can be overridden by changing configuration
information for individual RAPs. Individual RAPs can also be isolated from further
global changes as well.
NOTE: WEP Encryption and Enhanced Security settings override global 802.11
settings. Typically, changing these settings is done to isolate the RAP for testing.
settings. Typically, changing these settings is done to isolate the RAP for testing.
1 Using the System Configuration tab, drill down to the RFU that contains the
RAP(s) you want to configure, and then select the RAP icon to display its
configuration page.
configuration page.
2 For SSID, either leave the globally configured SSID name as it is, or enter up
to 31 alphanumeric characters to change it.