RadioFrame Networks Inc MCSERIESMP User Manual

MC-Series System Installation & Testing 

RadioFrame Networks, Inc.

The front of the RBS has the following LED indicators: 

•  STATUS indicator for each group—A, B, and C 
•  RADIOBLADE STATUS indicators, one for each RadioBlade slot in the RBS. LEDs are 

arranged by group (8 per group A, B, and C) and are numbered consecutively from left to 
right 1 through 24 (A: 1 through 7; B: 8 through16; and C: 17 through 24).  

Each RJ45 port (rear only) has an Ethernet link LED that indicates connectivity and an Ethernet 
activity LED that indicates Ethernet traffic. 

 

Indicates timing synchronization for group 

Indicates status of RB: green = operational; red = 
alarm condition; not lit = RB not present 

 

Each iDEN 2-port RadioBlade transceiver is equivalent to a Motorola Base Radio. Up to 24 
RadioBlades are installed into the RadioBlade Shelf. Each RadioBlade has an edge connector to 
interface with the slot connector in the RBS. This edge connector provides all data interfaces and 
clock inputs to the RadioBlade. The RF interface employs two SMA connectors, one for transmit 
and the other for receive. 

 

iDEN 2-port RadioBlade transceiver 

Tx port 

Rx port