RadioFrame Networks Inc RFU7 User Manual
981-0620-00 Rev A
RadioFrame Networks™, Inc.; 18211 NE 68th St. Suite E-120 Redmond, WA 98052
sales: info@radioframenetworks.com or 425.883.2088
iDEN RadioBlade
FCC Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1) This device may not cause harmful interference, and
2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required
to correct the interference at his own expense.
1) This device may not cause harmful interference, and
2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required
to correct the interference at his own expense.
Caution
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment.
operate the equipment.
Specifications
Agency Compliance
FCC Class A
CSA 22.2 No. 60950
ISTA 2A transit
Operating Environment
•
Operating Ambient Temperature: +0
o
C to
+55
o
C (+32
o
F to +131
o
F)
•
Storage Temperature: -40
o
C to +70
o
C (-40
o
F
to +158
o
F)
•
Relative Humidity: 10-90% non condensing
•
Altitude: -200 to +8000 feet above mean sea
level; above 8000', reduce maximum
operating ambient temperature by 2
level; above 8000', reduce maximum
operating ambient temperature by 2
o
C per
1000' to a maximum of 13000'
•
Shock: 40 g’s
•
Vibration: Level 3 earthquake
•
Keep product free from dust, wind, salt, liquids
Physical Specifications
•
Dimensions: 3" wide x 4" high (plus antenna) x 0.5" thick
(approx.)
(approx.)
•
Weight: 1 lb (approx.)
Input Power
•
3.3 VDC, 720mA max
•
2.5 VDC, 50mA max
Tx and Rx Power and Center Frequency Ranges
•
Tx center frequency range: 851.0125 to 869.9875MHz
Tx power range:
Tx power range:
-20 to +8dBm +/-3dB
•
Rx center frequency range: 806.0125 to 824.9875MHz