RadioFrame Networks Inc RFU7 User Manual
Installing the RadioFrame System
14
Figure 6
Mount the NCU only in an EIA-standard compliant 19” rack.
Connect the ACU patch cables to the NCU
1
Connect each ACU RJ45-to-RJ45 CAT 5 patch cable to the specified RJ45 port
(1-8) on the back of the NCU (see Figure 10).
Refer to the Site Design Specification to determine which ACU connects to each
port on the NCU. The Activity and Link LEDs above each NCU port will remain
unlit until each ACU has been installed and plugged in.
(1-8) on the back of the NCU (see Figure 10).
Refer to the Site Design Specification to determine which ACU connects to each
port on the NCU. The Activity and Link LEDs above each NCU port will remain
unlit until each ACU has been installed and plugged in.