RadioFrame Networks Inc RFU7 User Manual
Installing the RadioFrame System
19
Figure 10
A wall mount requires two screws to anchor the RFU.
Ceiling Mount
1
Place the 8.5” x 11” drawing template (P/N 981-1010-00) on the ceiling where the
RFU is to be mounted.
RFU is to be mounted.
2
Mark the four locations indicated on the template.
3
Drill four holes with the appropriately sized bit: 3/16” for the provided wood
screws, or 9/32” for 1/4” bolts (bolts not provided).
If using the provided wood screws, ensure that all four screws penetrate wood.
Otherwise, use alternative mounting screws or bolts to secure the ceiling bracket.
screws, or 9/32” for 1/4” bolts (bolts not provided).
If using the provided wood screws, ensure that all four screws penetrate wood.
Otherwise, use alternative mounting screws or bolts to secure the ceiling bracket.
4
Using four screws or bolts, attach the ceiling bracket to the ceiling as shown.
5
Attach the RFU to the ceiling mount bracket and fully tighten the thumbscrew.