VIC LLC VICDSMDSR497 User Manual
5
Charging Battery
The device has a built-in rechargeable battery. No extra battery installation is required.
Just charge the device when it indicates low battery.
To charge the battery, connect the device to any standard wall outlet via the DC-IN
port using the power adaptor.
Just charge the device when it indicates low battery.
To charge the battery, connect the device to any standard wall outlet via the DC-IN
port using the power adaptor.
Note:
a. You are strongly recommended to charge the battery immediately when the device indicates the
a. You are strongly recommended to charge the battery immediately when the device indicates the
battery is lower than 15%!
b. You can operate the device even when it is being charged. But for extended battery life, it is suggested
NOT to use the device when it is charging.
c. It is recommended to charge the battery before you use the device for the first time.
d. For maximum performance, lithium-
d. For maximum performance, lithium-
ion batteries need to be used often. If you don’t use the device
often, be sure to recharge the battery at least once per month.
e. Be sure to use only the dedicated power adaptor provided with the unit for charging.
Transferring Files from Computer
Before reading or playing files, you need to transfer media files from a computer to the
device.
(1) Connect the device to a computer with the supplied USB cable.
(2) T
device.
(1) Connect the device to a computer with the supplied USB cable.
(2) T
ap “Turn on USB storage” to connect the device to computer.
Remark:
1. HDMI jack
1. HDMI jack
– Connects to HD TV that supports HDMI connection.
2. Micro USB
– Connects to PC via USB cable.
3. DC-IN
– Connects to the provided AC adaptor for charging.
4.
Earphone
– connects to stereo earphones.
5. Power
–Briefly press to lock or unlock the screen; press and hold to turn on/off
the unit; press and hold down for ten seconds to reset the device.
6. VOL+/-
– Increase/ decrease the volume.