Ortivus AB 410000409 User Manual
59
Communication 9
9.3 Communication settings
The Communication settings view can be accessed by selecting
More:Settings:Com or by clicking on the communication information
on the Information bar. Transfer of information is only possible once a
connection with a receiving hospital workstation (HWS Communication
node) has been established.
In the Communication settings view (see Figure 37) it is possible to
In the Communication settings view (see Figure 37) it is possible to
select the HWS receiver in the Select receiver list. Communication
can be switched On, Off or be transferred to a Reserve channel that
can vary depending on whether the computer is docked or not.
Therefore, MobiMed has four possible choices of modem configuration
for active communication:
Communication should be switched off in places where mobile radio
communication is not allowed, e.g. in a hospital, by selecting Off in
Communication settings. When communication is switched off the text
message Communication off is shown on the information bar.
Important:
Switch off radio communication if there is a risk of interference with
medical apparatus. Remember to reconnect when the risk for
interference is over.
Figure 37. Communication settings
Computer position
Communication channel
Docked
ON
Modem configuration 1
Undocked
ON
Modem configuration 2
Docked
Reserve
Modem configuration 3
Undocked
Reserve
Modem configuration 4