HP Compaq KB-9965 311059-001 User Manual

2.  Press the latch adjacent to the system tray release handle to release the system tray (1). 

3.  Grasp the system tray release handle and pull the tray from the chassis until it stops in the 

extended position (2). 

 

  If the server is mounted into a rack, the system tray latches can be reached more easily by 

extending the server from the rack (approximately the depth of the drives) before sliding the system 

tray from the back of the chassis. 

 

This section provides the following information about the memory components and 
procedures for hot-plug and non-hot-plug removal and replacement of memory in the server. 

• 
• 
• 
• 
• 
• 
• 
• 

Parts of the memory board 

Memory board LEDs and icons 

DIMM installation requirements 

Removing a memory board 

Removing a DIMM 

Installing a DIMM 

Installing a memory board 

Configuring the memory