Wilson Electronics LLC BD800AM User Manual
Rev 1.1 PAGE
4
2. AMPLIFIER
2.1 About
The Amplifier greatly improves signal strength when using your portable
AMPS phone inside the car. The signal is received by the outside antenna
from the cell site. It is then AMPLIFIED/REPEATED and then transmitted to
your AMPS phone through the inside antenna. When the phone transmits it is
received by the inside antenna. It is then AMPLIFIED/REPEATED and then
transmitted to the cell site through the outside antenna.
2.2
Specifications:
FREQUENCY: 824-849 MHZ UPLINK 869-894 MHZ DOWNLINK
GAIN: 37 DB UPLINK 37 DB DOWNLINK
FLATNESS: + - 2DB
MAX RF OUTPUT POWER: UPLINK 1.86 W DOWNLINK 0.074W
NOISE FIGURE: 6DB @894MHZ
UPLINK DOWNLINK ISOLATION: > 90 DB
POWER CONSUMPTION: 12V, .5Amps
CONNECTOR: 2-FME-Male 50 OHMS
DIMENSIONS: 5.5 x 4.3 x 1.4 (INCHES) OR 14.0 x 10.8 x 3.5(CM)
WEIGHT: 1.32 POUNDS OR 600G
UPLINK DOWNLINK ISOLATION: > 90 DB
POWER CONSUMPTION: 12V, .5Amps
CONNECTOR: 2-FME-Male 50 OHMS
DIMENSIONS: 5.5 x 4.3 x 1.4 (INCHES) OR 14.0 x 10.8 x 3.5(CM)
WEIGHT: 1.32 POUNDS OR 600G