Wellink Corporation NEOBIT1014VA User Manual

 The NAT Options drop-down list, which provides access to 

the Global Information page (shown by default), the NAT 
Rule Configuration page, and the NAT Translations page, 
which shows current translations. 

 Enable/Disable radio buttons, which allow you to turn on or 

off the NAT feature. 

 The NAT Global Information table, which displays the 

following settings that apply to all NAT rule translations: 

 

For a NAT translation session on data that 
uses the TCP protocol, the translation will no 
longer be performed if no matching data 
packets are received after the specified time 
has elapsed. 

For a NAT translation on data using the TCP 
protocol, after a communication session has 
been closed, the translation will no longer be 
performed if no matching data packets are 
received after the specified time has elapsed.

For a NAT translation session on data that 
uses the TCP protocol, the translation will no 
longer be performed if no matching data 
packets are received after the specified time 
has elapsed. 

Same as TCP Idle Timeout, but for UDP 
packets. 

Same as TCP Idle Timeout, but for ICMP 
packets. 

Same as TCP Idle Timeout, but for GRE 
packets. 

For all other NAT translation sessions, the 
number of seconds after which a translation 
session will no longer be valid. 

When an napt rule is defined, the source 
ports will be translated to sequential numbers 
in this range. 

 

If you change any values, click 

, and then click the 

Admin tab and commit your changes to permanent system memory 
(see page 40). 

You can click 

 to view accumulated data on 

how many NAT rules have been invoked and how much data has 
been translated. A page similar to the one shown in Figure 27 
displays.