Orbicle Co. Ltd. ORB-R15F User Manual
Adjust The Volume
Press Volume button knob, you reach a comfortable listening level. Press the Button Up
to increase and Down to decrease volume.
to increase and Down to decrease volume.
Set The Channel
1. With radio on, press the Function Button, Current Channel (88) will begin to flash.
2. Press Up/Down Button to change channel while flashing.
3. Press PTT button or Function button after set new channel.
Set The Tone Code
1. With radio on, press the Function Button, Current Channel (88-
small size
) will
begin to flash.
2. Press Up/Down Button to change code while flashing.
3. Press PTT button or Function button after setting new code.
Function The PTT(Transmission)
1. Transmit the signal and turn on the red color LED while press the PTT Button.
2. Change the stand-by mode if set free the PTT Button.
Call Tone
The Call Tone gets other's attention before you start talking. Press PTT Button two times
continuous and users on your channel will hear your Call Beep. PASSION has 5 Call beep.
continuous and users on your channel will hear your Call Beep. PASSION has 5 Call beep.
Set The Call Tone
1. With the radio on, press Function Button. Current Call Beep will begin to flash [C 01].
2. Use Up/Down Button to change and hear Call Beep while flashing.
3. Press Function Button to set new Call Beep.
Function The Monitor
1. Press Monitor(MON) Button and hear all signal of receiving in set channels while
turn on the green color LED.
2. Keep Monitor Mode without press button while press 5 second continuously.
3. Set free after press MON Button one time.
3. Set free after press MON Button one time.
Lock Button
Just turn on the menu lock by pressing the Scan Button for three seconds. Now you'll see
a lock on the display. You can turn off the menu lock by pressing the Scan Button for
three seconds again.
a lock on the display. You can turn off the menu lock by pressing the Scan Button for
three seconds again.