Comba Telecom Ltd. RD-8132 User Manual
USER MANUAL FOR RD-8132
RD-8132 QI
Copyright - refer to title page
Page 14
ENU Status : 1-0-0
3 OMT
The equipment can be monitored and controlled by OMT software running on a local PC with local
commissioning cable, remote connection to the equipment via wireless GSM / CDMA network.
commissioning cable, remote connection to the equipment via wireless GSM / CDMA network.
z
OMT software running on a local PC with serial connection to the equipment.
z
OMC (optional) software with remote connection to the equipment over wireless GSM / CDMA
network.
network.
This chapter is to introduce how to apply local and remote connection to OMT for the first installation, for
the detailed OMT information, please refer to OMT user manual and other references.
Notice: The OMC software with remote connection to the equipment over wireless GSM / CDMA network
is optional for customers.
3.1 LOCAL AND REMOTE CONNECTIONS TO OMT
After installing OMT software on the PC, connection to the equipment can be done locally or remotely.
Double click the OMT exlorer icon, the OMT Explorer main screen window will appear.
Double click the OMT exlorer icon, the OMT Explorer main screen window will appear.
3.1.1 LOCAL CONNECTION TO OMT
After databse configuration is done successfully, the following window will pop up and select [Local
connection via RS-232] for local connection.
connection via RS-232] for local connection.
Figure 9: Connection Type
Select the desired communication port and click “OK”, it will enter into the main window of OMT.
Figure 10: Serial Port Configuration