ECORE TECHNOLOGY COMPANY LIMITED HL2018A User Manual
3 / 4
the volume.
z
USB charge
1.
Plug the unit into wall outlet.
2.
Press the power button to turn on the unit.
3.
Plug one end of the USB charging cable(not included in package) to the USB port on the unit, and then plug the other end of
the cable to your iPhone, iPad, Smartphone, Tablets or other devices.
4.
The Outlet speaker starts to charge the connected device.
Technical parameters
Note: All specifications are subject to change without notice.
Product Name: Outlet speaker
Model Name
:HL2018A
Input:
100‐240V~50/60HZ 0.5A
Output:
1.5W x 2 RMS
Bluetooth Profile Supported: A2DP, AVRCP
Working range: up to 8-12m
Working atmosphere: 0
℃-40℃/20%-90%RH
Maintenance
Please follow the instructions below before clear the unit
z
Power off the unit first before clear
z
Use a soft, dry, lint-free cloth to wipe gently
z
Do not use alcohol, benzene, thinners or other chemical detergents as these can cause the casing to be warped or discolored
Storage
z
If the unit will not be used for an extended period of time, power off the unit and place the unit with accessories into the package
z
Do not set the unit in a damp, high temperature or the sun point-blank place
Troubleshooting
Question: Can’t pair successfully after multiple connections
?
Solution
:
(1) Make sure the unit connect to the wall outlet well.
(2) Check if the indicator lights on, if the indicator goes off, please press the power button to turn on the unit.
(3) Perhaps there are many Bluetooth devices around the surroundings to interfere the searching, please close the Bluetooth
(2) Check if the indicator lights on, if the indicator goes off, please press the power button to turn on the unit.
(3) Perhaps there are many Bluetooth devices around the surroundings to interfere the searching, please close the Bluetooth
function in the device you don’t need.
(4) Power off and then power on the unit, to restart the Bluetooth function of the unit or your Bluetooth device.
(5) Unplug the AUX cable from the unit, and re-pair the unit and the Bluetooth device.
Question: The sound occurs staccato when play
(5) Unplug the AUX cable from the unit, and re-pair the unit and the Bluetooth device.
Question: The sound occurs staccato when play
?
Solution
:
(1) Make sure the working distance is in 8-12m.
(2) Clear away the block between the unit and the Bluetooth device to prevent the poor connecting.
(3) Please check if the the Bluetooth audio device is in low battery, if so, please your Bluetooth audio device.
(2) Clear away the block between the unit and the Bluetooth device to prevent the poor connecting.
(3) Please check if the the Bluetooth audio device is in low battery, if so, please your Bluetooth audio device.