RFNet Technologies Pte Ltd AP2010 User Manual
Pg 14 of 26
Basic Setting > LAN Setting
This page allows you to choose the type of IP mode
Static IP mode: When you boot up the AP for the first time, it is in Static mode. You can
assign a Static IP to the AP.
DHCP mode: The AP will obtain an IP Address from an upstream DHCP Server.
DHCP mode: The AP will obtain an IP Address from an upstream DHCP Server.
System Name: This is to assign a name to the AP for system identification.
LAN IP address: This is where you assign a local IP address to your AP’s LAN port. The
LAN IP address: This is where you assign a local IP address to your AP’s LAN port. The
factory default value is 192.168.1.20. If you give your computer a static IP address, the
gateway of your computer must be set to this IP for you to access the Internet.
Subnet Mask: This is where you assign the corresponding subnet mask. The default subnet
gateway of your computer must be set to this IP for you to access the Internet.
Subnet Mask: This is where you assign the corresponding subnet mask. The default subnet
mask is 255.255.255.0.
(Note: When you change the LAN Setting of the AP, you need to reset/renew the Local
(Note: When you change the LAN Setting of the AP, you need to reset/renew the Local
computer IP address.)
Gateway Address: This displays the gateway address of your WAN as given by the ADSL
Gateway Address: This displays the gateway address of your WAN as given by the ADSL
modem.
DNS Server: This displays the IP address of the DNS server as given by the ADSL modem.
DNS Server: This displays the IP address of the DNS server as given by the ADSL modem.
You can manually set the DNS server if your ISP provides you with the IP address of the DNS
server.
server.
Take note:
User must un-tick the manually set DNS if your ISP did not provide the DNS IP address.