ORCOM Co. Ltd OP-42M1A User Manual

ENGLISH

1 POWER

If you want to turn on or off the monitor:
1) Plug the AC cord in.
2) If the POWER button of unit is pressed, monitor will

become red and monitor is on stand-by mode.
(ON/OFF indicator is red.)

3) If the POWER button of unit is not pressed, press it.
4) Press the ON button of remote control to turn the

monitor on, Then, ON/OFF indicator becomes green.

5) Press the OFF button of remote control to turn the

monitor off.

Then, ON/OFF indicator becomes red and monitor is

on stand by mode.
IF you donÕt have remote control, you can press any
key of the productÕs Left/Under side to turn on the
monitor.

2 VOLUME

To adjust the volume:
1) Press and hold the VOLUME + button (on the remote

control or the unit) to increase to the desired level.

2) Press and hold the VOLUME - button (on the remote

control or the unit) to decrease to the desired level.

3 MUTE

To cancel the sound:
Press the MUTE button on the remote control to cancel
the sound; press again to restore.

4 DISPLAY

To check the source settings on the screen:
1) The screen changes each time the RECALL button is

pressed.

2) If the button is not pressed for approximately two

seconds, the menu turns off.

5 DIGITAL ZOOM

Digital zoom specifies the picture position and enlarges
the picture.
1) Press the ZOOM button to enter into zoom mode.

Current zoom mode will be displayed.

ASIC

PERATIONS

6 OFF TIMER

To set the off timer:

The off timer can be set to turn the power off after 30,
60, 90 or 120 minutes.
1) Press the OFF TIMER button to start the timer at 30

minutes.

2) Press the OFF TIMER button to the desired time.

30 ➝ 60 ➝ 90 ➝ 120 ➝ Off ➝ 30...

3) The timer starts when the menu turns off.
4) You can check the time left by pressing the OFF TIMER

button once.

To cancel the off timer:

1) Press the OFF TIMER button until the timer on screen

reaches to ÒOffÓ.

2) The off timer is canceled.

2) To change the size of the picture:

Press the ZOOM+ button and enlarge the picture.
A press of the ZOOM- button will reduce the picture
and return it to its original size.
Set the zoom mode to Ò0Ó if you want to watch the
picture with original size.

3) To change the picture position:

Select the position with the / / /

buttons.

After the power is turned off with the off timer ...
A slight current is still supplied to the monitor. When

you are leaving the room or do not plan to use the

system for a long period of time, turn off the power of

the monitor.

OFF TIMER 30

OFF TIMER Off

The more the picture is enlarged, the more its particle

becomes thick and dim.
Zoom size can be selected from 0 to 20.
To exit from Zoom mode, press EXIT button.

ZOOM

Vol- +30