Netgear 09200112 User Manual
Mobile Broadband Wireless-N Router MBRN3000 User Manual
A-2
Technical Specifications and Factory Default Settings
v1.0, October 2009
Factory Default Settings
You can use the Restore Factory Settings button that is located on the bottom of your router to
reset all settings to tehir factory defaults. This is called a hard reset. To perform a hard reset, push
and hold the Restore Factory Settings button for 6 seconds. Your router will return to the factory
configiuration settings that are shown in the following table.
reset all settings to tehir factory defaults. This is called a hard reset. To perform a hard reset, push
and hold the Restore Factory Settings button for 6 seconds. Your router will return to the factory
configiuration settings that are shown in the following table.
Feature
Default Behavior
Router Login
User login URL
http://www.routerlogin.net or http://www.routerlogin.com
User name (case sensitive)
admin
Login password (case sensitive)
password
Internet Connection
WAN MAC address
Use default address
WAN MTU size
1492
Port speed
AutoSense
Local Network (LAN)
LAN IP
192.168.0.1
Subnet mask
255.255.255.0
RIP direction
None
RIP version
Disabled
RIP authentication
None
DHCP server
Enabled
DHCP starting IP address
192.168.0.2
DHCP ending IP address
192.168.0.254
DMZ Disabled
Time zone
PST for North America, GMT for other locations
Time zone adjusted for daylight saving
time
time
Disabled
Firewall