Netgear 10200132 User Manual

NETGEAR Roku Player (NTV250)

Installation Guide

©2010   NETGEAR, Inc.  All rights reserved.

Thank you for selecting NETGEAR products. 

Locate the serial number on the label of your product and use it to register 
your product at 

http://www.NETGEAR.com/register

. Registration is required 

before you can use the telephone support service. Registration at the 
NETGEAR website is strongly recommended.

Go to 

http://support.netgear.com

 for product updates and Web support. 

For complete DoC please visit the NETGEAR EU Declarations of 
Conformity website at:

http://kb.netgear.com/app/answers/detail/a_id/

11621/

NETGEAR, the NETGEAR logo, ProSafe, Smart Wizard, and Auto Uplink 
are trademarks or registered trademarks of NETGEAR, Inc. Microsoft, 
Windows, Windows NT, and Vista are registered trademarks of Microsoft 
Corporation. Other brand and product names are registered trademarks or 
trademarks of their respective holders. 

In the interest of improving internal design, operational function, and/or 
reliability, NETGEAR reserves the right to make changes to the products 
described in this document without notice. NETGEAR does not assume 
any liability that may occur due to the use or application of the product(s) or 
circuit layout(s) described herein.

Package Contents

Remote control

NETGEAR Roku Player

Power adapter

2 AAA batteries

A/V cable

Your Player at a Glance

1: Connect to the TV

Choose the setup that matches the ports on your TV. For best 
picture quality, use an HDMI connection (if available). Make 
sure your TV is on and set to display the correct video input.  

Connect an HDMI cable (sold separately) to the HDMI port on 
your player and to the HDMI IN port on your TV.

Connect the yellow connectors on the A/V cable (included) to 
the VIDEO port on your player and the VIDEO IN port on your 
TV. Connect the red and white connectors to the R-AUDIO-L
ports on your player and the L/R AUDIO IN ports on your TV.