Netgear 10300137 User Manual

Wireless Button Configuration

Select the choice to determine the behavior of the WPS push button 
on the front panel when depressed.

Control WiFi Only: Pressing the push button will toggle the WiFi 

function. If WiFi is turned on, pressing the push button will turn 
off the WiFi. Pressing it again will turn on the WiFi. This function 
is only available if the WiFi function is enabled. The Wireless 
Broadband function is unaffected. 

Control Both WiFi and Wireless Broadband: Pressing the 

push button will toggle both the WiFi function and Wireless 
Broadband at the same time. If WiFi is turned on, pressing the 
push button will turn off the WiFi. At the same time, the wireless 
broadband connection is disconnected. Pressing the push button 
again, WiFi will be turned on and the router will attempt to 
re-establish wireless broadband connection. Depending on the 
coverage, wireless broadband coverage may or may not be 
connected successfully.

Connection status

Current WAN port status