Netgear 11200166 User Manual

Customizing Your Network Settings

5-24

If this check box is selected, the router communicates wirelessly only with other APs whose MAC 
addresses are listed in this screen. The router still communicates with wire-connected LAN 
devices.

The wireless repeating function works only in hub and spoke mode. The units cannot be daisy 
chained. You must know the wireless settings for both units. You must know the MAC address of 
the remote unit. First, set up the base station, and then set up the repeater. To set up the base 
station:

1. Set up both units with exactly the same wireless settings (SSID, mode, channel, and security). 

Note that the wireless security option must be set to None or WEP.

Note: The WNDR3700 router is always in dual band concurrent mode, unless you turn 

off one radio. Be aware that if you enable the wireless repeater in either radio band, 
the wireless base station or wireless repeater cannot be enabled in the other radio 
band. However, if you enable the wireless base station in either radio band and use 
the other radio band as a wireless router or wireless base station, dual band 
concurrent mode is not affected.