Microsoft Corporation LPS-6 User Manual

The loopset vibrates twice and the Bluetooth connection indicator stops blinking or flashing.

Pair and connect your loopset with your phone

Make sure your loopset is switched on, and in pairing mode.
1. Activate Bluetooth on your phone, and search for Bluetooth devices.

2. Select the loopset from the list to pair your phone with it.

3. If necessary, enter the passcode 0000.
Your loopset is now paired and connected with your phone. The Bluetooth connection indicator slowly

flashes.
When you switch on the loopset the next time, it automatically tries to recreate the latest connection.

Tip: When your loopset is connected to a device, but you need to pair with other devices, you

can go back to pairing mode by pressing the multifunction key for about 5 seconds.

If the loopset is not connected to a paired device within about 30 minutes, it switches off

automatically.
If the connection is lost, the loopset vibrates and the Bluetooth connection indicator quickly blinks.

Pair and connect your loopset using NFC

If your phone supports Near Field Communication (NFC), you can quickly pair and connect your

loopset, or switch the connection between paired devices.