Microsoft Corporation RM-413 User Manual

available in the location and your device must be

connected to it.

Important:  Always enable one of the available

encryption methods to increase the security of your

wireless LAN connection. Using encryption reduces the

risk of unauthorised access to your data.
To use a WLAN, you must create an internet access

point in a WLAN. Use the access point for applications

that need to connect to the internet. A WLAN

connection is established when you create a data

connection using a WLAN access point. The active WLAN

connection is ended when you end the data

connection. You can also end the connection manually.
You can use a WLAN during a voice call or when packet

data connection is active. You can only be connected to

one WLAN access point device at a time, but several

applications can use the same internet access point.
When the device is in the Offline profile, you can still

use a WLAN, if available. Remember to comply with any

applicable safety requirements when establishing and

using a WLAN connection.
If you move the device to another location within the

WLAN and out of range of a WLAN access point, the

roaming functionality can automatically connect your

device to another access point that belongs to the same

WLAN. As long as you remain within range of access

points that belong to the same network, your device

can stay connected to the network.

Tip:  To check the unique media access control

(MAC) address that identifies your device, for

example to configure the MAC address of your

device to a WLAN router, enter *#62209526# in

the home screen. The MAC address is displayed.

To set your device to show wireless LAN (WLAN)

availability, select 

 > 

 >

 and 

 > 

 > 

.

If a WLAN is available,   is displayed.

Select 

 > 

 > 

 >

.

The WLAN wizard helps you find and connect to a

wireless LAN. When you open the application, your

device starts to scan for available WLANs and lists them.
Select 

 and from the following:

•

  — Update the list of available WLANs.

•

  — Filter out WLANs in the

list of found networks. The selected networks are

filtered out the next time the application searches

for WLANs.

•

  — Start browsing the web

using the access point of the WLAN.

•

  — Continue web browsing

using the currently active WLAN connection.