Microsoft Corporation RM-469 User Manual
•
Time format
and
Time separator
— Select whether
to use the 12-hour or 24-hour clock system and with
which symbol to separate hours and minutes.
•
Clock type
— Define the clock type.
•
Clock alarm tone
— Select the tone for the alarm clock.
•
Alarm snooze time
— Define the snooze time for the
alarm clock.
•
Workdays
— Define the days of the week that are work
days for you.
•
Automatic time update
— Update the time, date, and
time zone information automatically (network service).
Common accessory settings
Select
Menu
>
Ctrl. panel
>
Settings
and
General
>
Enhancement
.
With most accessories, you can do the following:
To define which profile is activated when you attach an
To define which profile is activated when you attach an
accessory to your device, select the accessory and
Default
profile
.
To set the device to answer phone calls automatically after
5 seconds when an accessory is attached, select
Automatic answer
>
On
. If the ringing type is set to
Beep once
or
Silent
in the selected profile, automatic
answering is disabled.
To illuminate the device while it is attached to an
To illuminate the device while it is attached to an
accessory, select
Lights
>
On
.
Turn to silence calls or alarms
When you activate the sensors in your device, you can
control certain functions by turning the device.
Select
Menu
>
Ctrl. panel
>
Settings
and
General
>
Sensor settings
.
Select from the following:
•
•
Display rotation
— Set the display to rotate
automatically according to the device's orientation.
•
Turning control
— Set the device to silence incoming
calls or snooze alarms when you turn the device face
down.
Security settings
About security settings
Select
Menu
>
Ctrl. panel
>
Settings
and
General
>
Security
.
Avoid using codes that are similar to emergency numbers
to prevent accidental dialling of the emergency number.
Codes are shown as asterisks. When you change a code,
enter the current code, then the new code twice.
Device and SIM card security
To change the PIN code, select
Phone and SIM card
>
PIN code
. The new code must be 4 to 8 digits long. The
PIN code protects your SIM card against unauthorised use
and is provided with the SIM card. After three consecutive
incorrect PIN code entries, the code is blocked, and you
need to use the PUK code to unblock it before you can use
the SIM card again.
To set the keypad to lock automatically after a defined
To set the keypad to lock automatically after a defined
period, select
Phone and SIM card
>
Keypad autolock
period
.
To set a time-out after which the device is automatically
locked and can be used only if the correct lock code is
96
Sett
in
gs
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black