Microsoft Corporation RM-584 User Manual
•
Automatic time update
— Update the time, date, and
time zone information automatically (network service).
Common accessory settings
Select
Menu
>
Ctrl. panel
>
Settings
and
General
>
Enhancement
.
With most accessories, you can do the following:
To define which profile is activated when you attach an
To define which profile is activated when you attach an
accessory to your device, select the accessory and
Default
profile
.
To set the device to answer phone calls automatically after 5
seconds when an accessory is attached, select
Automatic
answer
>
On
. If the ringing type is set to
Beep once
or
Silent
in the selected profile, automatic answering is
disabled.
To illuminate the device while it is attached to an accessory,
To illuminate the device while it is attached to an accessory,
select
Lights
>
On
.
Sensor settings
Select
Menu
>
Ctrl. panel
>
Settings
and
General
>
Sensor settings
.
To set the device to silence an incoming call or snooze an
alarm when you turn the device face down, select
Turn to
silence
.
Security settings
About security settings
Select
Menu
>
Ctrl. panel
>
Settings
and
General
>
Security
.
Avoid using codes that are similar to emergency numbers to
prevent accidental dialling of the emergency number. Codes
are shown as asterisks. When you change a code, enter the
current code, then the new code twice.
Device and SIM card security
To change the PIN code, select
Phone and SIM card
>
PIN
code
. The new code must be 4 to 8 digits long. The PIN code
protects your SIM card against unauthorised use and is
provided with the SIM card. After three consecutive incorrect
PIN code entries, the code is blocked, and you need to use the
PUK code to unblock it before you can use the SIM card again.
To set the keypad to lock automatically after a defined period,
To set the keypad to lock automatically after a defined period,
select
Phone and SIM card
>
Keypad autolock period
.
To set a time-out after which the device is automatically
locked and can be used only if the correct lock code is entered,
select
Phone and SIM card
>
Phone autolock period
. Enter
a number for the time-out in minutes, or select
None
to set
off the autolock period. When the device is locked, you can
still answer incoming calls, and calls may still be possible to
the official emergency number programmed into your
device.
To set a new lock code, select
To set a new lock code, select
Phone and SIM card
>
Lock
code
. The preset lock code is 12345. Enter the current code
and then the new code twice. The new code can be 4-255
characters long. Both alphabets and digits can be used, and
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
2009-06-25 13:16:47 P3657 user guide publication 3