WebGate Inc. WB106X-WG1K User Manual
WebEye B106
WebEye B106 User’s Guide
9
III. WebEye B106 Installation Summary, Connection & Placing
1. Installation Summary
l Connect Ethernet and Power to WebEye on local network for configuration.
l Install WebEye Setup Program into a PC on local network.
l Assign an IP address to WebEye and configure administrator’s condition.
l Configure user’s condition.
l Place WebEye, re-connect power and Ethernet.
l Install WebEye Setup Program into a PC on local network.
l Assign an IP address to WebEye and configure administrator’s condition.
l Configure user’s condition.
l Place WebEye, re-connect power and Ethernet.
2. Connecting
l Connect Ethernet line to the Ethernet port in the rear.
l Connect the power supply .
l Confirm that the LED of the Ethernet port blinks.
l Connect the power supply .
l Confirm that the LED of the Ethernet port blinks.
IV. Installing WebEye B106 Setup Program
l Insert the WebEye Setup disk.
l Drag the WebEye Setup icon onto the desktop.
l Double-click on the icon.
l Drag the WebEye Setup icon onto the desktop.
l Double-click on the icon.