Summer Infant 36014T User Manual

v

v

v

v

v

v

v

v

v

MONITOR OWNER’S GUIDE

3 6 0 1 4

Summer Infant (USA), Inc.  |  1275 Park East Drive  |  Woonsocket, RI 02895  |  401-671-6551                

8/18

K

eep this instruction manual for future reference. Please read the following 

instructions and warnings carefully.  

 

tabletop

wall mount

SETTING UP THE CAMERA & HANDHELD SCREEN

1

STRANGULATION HAZARD: 

Children have strangled in 

cords. Keep this cord out of the 

reach of children (more than 3 

ft. (0.9m) away).

WARNING

Read all warnings prior to using this product.

4.3 in. Color Video Monitor

NOTE:  For best picture 
focus, place camera 6 to 8 
ft. from crib. 
1. Plug in nursery camera. 
2. Place camera on a flat 
sur face, such as a dresser 
or shelf. 
3. Or, mount the camera 
on a wall using the screw 
and wall anchor provided. 

3-feet of the crib. 
Secure the cord to your wall using the 6 
security clips included to keep the cord 
away from baby’s reach. 

Charge for 7 hours before first use.  After 
the initial charge, recharge when 
necessary for 7 hours. We recommend 
charging over night.
NOTE: While powered off, you will not see 
an indicator that the handheld is 
charging. LED will light up for 5 seconds to 
let you know it is charging, then shut off.

SleepZone™

virtual boundary

box

remote

camera

steering

digital

privacy

up to

1,000 ft.

range

vox

voice-activated

screen wake-up

talk-back

to baby &

temp display

ADJUSTING THE HANDHELD SETTINGS

3

Press 

VOLUME button to 

increase/decrease sound level.

Flip up antenna to improve reception.

1. Press MENU/SELECT button.
2. Press the RIGHT ARROW button to 
highlight the Brightness icon. 
3.  Press  MENU/SELECT to confirm.

4.  Press the RIGHT/LEFT  ARROW buttons to 
increase or decrease brightness. 
5. Press MENU/SELECT to confirm.

1.  Press  MENU/SELECT.
2. Press the LEFT ARROW button and 
highlight the Settings icon.
3.  Press  MENU/SELECT to confirm.

4. Press the RIGHT ARROW button to 
highlight the Temperature icon. 
5.  Press  MENU/SELECT to confirm.

6. Press the LEFT/RIGHT ARROW buttons to 
select ºF or ºC. 
7.  Press  MENU/SELECT to confirm and exit 
settings. 

This feature helps conserve battery life by 
automatically turning off the screen every 
30 seconds when the handheld is not 
plugged into an A/C adapter. 
1. To turn VIDEO OFF and conserve battery 
power, press and hold the 

button for 1 second.
• The screen will go dark.
• The audio feature will remain activated, 
allowing you to monitor sounds.
• If VOX feature is on, video will turn on 
automatically when sound is detected.

2. To turn VIDEO ON, press the 

ZOOM/VIDEO button.

HEARING & SOOTHING YOUR BABY

5

The LED light bar on the side of the 
handheld will light up as it picks up noises, 
even in power save mode. 
(When battery is low, the first LED flashes 
red and handheld beeps.) 

2. To adjust the baby boundary area, 
press and hold the 

 button for 

3 seconds.

• Adjust the camera view with the 

UP/DOWN/LEFT/RIGHT ARROW buttons. 
• Use the 

ZOOM button to bring the image 

closer.
• Press 

MENU/SELECT to confirm.

• Adjust the Baby Boundary ALARM volume 
with the 

UP/DOWN ARROW buttons. 

• Press  MENU/SELECT to confirm.

1.  To activate, press the SleepZone

 button

(automatically set to a default area).

Note: All buttons except for SleepZone

POWER, and MENU/SELECT will become 
inactive. 
• Press any of these three buttons to shut 
off SleepZone

TM

.  

You can also access SleepZone

TM

 feature 

through the MENU.
1. Press MENU/SELECT button to enter the 
menu screen.
2. Press the RIGHT ARROW button to 
highlight SleepZone

TM

. and press 

MENU/SELECT button to confirm.
To extend battery life, we recommend 
plugging in your handheld while using the 
SleepZone™ feature.

The SleepZone

TM

 feature creates a virtual 

boundary box within your screen. 
This feature alerts you with a sound on 
your handheld if baby crosses virtual 
boundary or an object enters the 
boundary area you've set.

1. Press the LULLABIES AND WHITE NOISE 
button.
A lullabies icon will appear briefly in the 
screen’s bottom right cor ner. 
• A lullaby will play.
The lullaby icon will appear at the top of 
the screen.

VIEWING YOUR BABY

4

Remotely control the camera angle from the handheld. 
Use the 

UP/DOWN/LEFT/RIGHT ARROW buttons to move the camera angle up, down, 

and side to side.

1. Press the ZOOM/VIDEO button to zoom 
in. 
• A zoom icon will appear briefly in the 
screen’s bottom right cor ner.
• The zoom icon will appear at the top of 
the screen.
• There are 3 levels of zoom.

Reassure and soothe baby with the sound of your voice and the press of a button.

1. Press and hold the TALK-BACK button to talk to your baby. 
The talk-back icon will appear briefly in the screen’s bottom right cor ner.
2. Release the button to end talk-back mode.

The Vox feature, when on, will turn on your 
screen when it is in power save mode and 
the camera picks up a sound.
1. Press the MENU/SELECT button to enter 
menu screen. 
2. Use the LEFT ARROW button to highlight 
the Vox icon and press 

MENU/SELECT.

NOTE: Lullabies/white noise will turn off 
automatically after 20 minutes.

3. Press the LEFT/RIGHT ARROW buttons to 
highlight Vox on     or Vox off     . 
4. Press MENU/SELECT to confirm.
The Vox icon will appear at the top of the 
screen. 

• Adjust the size of the baby boundary 
with the 

LEFT/RIGHT ARROW buttons.

• There are two box size options to choose 
from.

v

Congratulations! You are now ready to use your 
Baby Pixel

®

 Cadet

™

 Digital Color Video Monitor! 

Temperature

Lullabies & White Noise

Vox

Zoom (3 levels)

Reception

Camera Selection

Battery Life/Plugged In

Power

Zoom/Video

Lullabies & White Noise

SleepZone™

Volume

Menu/Select

Up/Down/Left/Right

Talk-Back

Vox Menu 

Settings Menu

Camera Menu

Brightness Menu

SleepZone™ Menu

GETTING TO KNOW YOUR HANDHELD

2

Press the 

MENU/SELECT  button to access the menu options. Use the LEFT/RIGHT 

ARROW buttons to highlight the Menu items. Press MENU/SELECT to confirm a 
selection.
By default, Camera Options will be highlighted first in the menu navigation bar. 

Flip out the kick-stand and 
place the monitor on a 
stable, level surface.

CADET

1. Press and hold the camera POWER 
button for 3 seconds. 
A green light will appear near the lens. 
2. Press and hold the handheld POWER 
button for 3 seconds. 
The handheld will automatically sync with 
the camera. 
NOTE: The handheld unit and the camera 
are paired at the factory for privacy 
reasons.
(If the handheld and camera are not 
paired with each other for any reason, see 
"Adding a Camera" section.)

v

v

lullabies

& white

noise

v

v

v

v

v

v

v

v

2. Press and hold the LULLABIES  AND 

WHITE NOISE button to access the 
Lullabies and White Noise Menu. 

3. Press the LEFT/RIGHT ARROW buttons to 
select a different lullaby. Press 
MENU/SELECT.  
4. Press the LULLABIES AND WHITE NOISE 
button again to turn off.
Once you choose the lullaby or white 
noise sound that you like, this will remain 
the active sound until you make a 
different selection.

You can also access the Lullabies & White 
Noise feature through the MENU.
1. Once in the menu, press the 

MENU/SELECT button to select Settings. 
Use the 

RIGHT ARROW to highlight to the 

Lullabies & White Noise icon and press the 
MENU/SELECT button.   

2. Use the LEFT/RIGHT ARROW buttons to 
navigate between 2 lullabies and 3 white 
noise options.
3. Press MENU/SELECT to confirm and exit 
settings.  
NOTE: You can also turn the 
lullabies/white noise on and off by 
pressing the 

POWER button on the back of 

the camera once without holding.

v

v

v

v

v

v

digital

zoom,

3 levels

or