Denso Wave WMGMR01 User Manual

 

38 

 

 

Wipe the BHT's charge terminals and battery cartridge terminals with a cotton swab 
or the like periodically. Clean the BHT housing with a dry, soft cloth. Before cleaning, 
be sure to turn the BHT off. 

•

 Never use benzene, alcohol, or other organic 

solvents. The housing may be marred or the 
paint may come off. 

•

 Never rub or strike the liquid crystal display 

(LCD) with anything hard. The LCD surface will 
be easily scratched or broken. 

•

 When cleaning the keypad, do not scrub the 

surface too hard or pull on the keys. Doing so 
may break the keys. 

•

  If the BHT becomes smudged, wipe it with a soft cloth that has been moistened in 

soapy water (always use neutral detergent) and wrung out thoroughly. 

 

Dust or dirt accumulating on the clear plate of the bar-code reading window will 
affect reading performance. If you use the BHT in dusty areas, therefore, 
periodically check the clear plate of the bar-code reading window and clean it if 
dusty. 

•

  To clean the plate, first blow the dust away with an airbrush. Then wipe the plate 

with a cotton swab or the similar soft one gently. 

•

 If sand or hard particles have accumulated, never rub the plate; doing so will 

scratch or damage it. Blow the particles away with an airbrush or a soft brush.