Opticon Sensors Europe BV H32 User Manual
Opticon
H - 32
Specifications Manual
12
7.2. Basic Optical Specifications MDI3100
Item
Characteristics
Scan method
CMOS area sensor (black and white)
-
Number of effective pixel (H) × (V)
752 × 480 dot
Image capture speed
(*1)
(*1)
Frame rate
60 fps
Focal distance
From the front edge of scan engine
130 mm
View angle
Horizontal
Approx. 40.6°
Vertical
Approx. 26.4°
Auxiliary light source
( LED × 2 )
( LED × 2 )
Red LED
-
Peak Wave Length
617 nm
Directivity angle 2θ1/2 (*2)
60°
Maximum radiation output (*3)
15000 mcd
Light source for aiming
( LED x 1)
( LED x 1)
Green LED
-
Peak Wave Length
528 nm
Maximum radiation output (*4)
18700 mcd
*1 The fastest seed of image capture
*2 The reference value extracted from the LED datasheet
*2 The reference value extracted from the LED datasheet
*3 *4 The reference value extracted from the datasheet (conditions: 25 °C, IF = 140 mA)
7.2.1.
Aiming pattern
The aiming is used for the following purpose:
1. Fill light to recognize the appropriate reading range.
2. Fill light when auto trigger is used.
The aiming specifications are as follows:
- An optical axis of imaging field of view and the center of horizontal aiming width
coincide at a distance of L=110±20 mm from the front edge of the camera module.
1. Fill light to recognize the appropriate reading range.
2. Fill light when auto trigger is used.
The aiming specifications are as follows:
- An optical axis of imaging field of view and the center of horizontal aiming width
coincide at a distance of L=110±20 mm from the front edge of the camera module.
- The aiming horizontal width to the horizontal width of imaging filed of view at a
distance of L=110 is 80%±10%.
distance of L=110 is 80%±10%.