Radwin Ltd. 5XACMD3CN User Manual
FinM Deployment Guide
Release 4.2.46
3‐4
Main Tab
Configuring the Radio Network
Set items in this table first, before carrying out any other tasks on this tab.
Figure 3‐2: Main tab: Pre‐Conditions
Mode: Shows the mode of the Configurator (Protected or Unprotected)
Download software:
Determines working details of the Configure Unit and HBS Batch Configuration
buttons as follows:
buttons as follows:
No means that changes you make using the Configure Unit or HBS Batch
Configuration buttons will affect this Configurator file only, and will not be
downloaded to any units.
Configuration buttons will affect this Configurator file only, and will not be
downloaded to any units.
Configuration Only means that the changes you make using the Configure Unit
or HBS Batch Configuration buttons will affect this Configurator file and will be
downloaded to the relevant units. You must make sure that the radio units in
use have the required firmware installed on them.
or HBS Batch Configuration buttons will affect this Configurator file and will be
downloaded to the relevant units. You must make sure that the radio units in
use have the required firmware installed on them.
Configuration & Release means that the changes you make using the
Configure Unit or HBS Batch Configuration buttons will affect this Configurator
file, the system will then check if the relevant radio units need a firmware
update and if so, will update them, and only then will download the changes
you have made to the relevant units.
Configure Unit or HBS Batch Configuration buttons will affect this Configurator
file, the system will then check if the relevant radio units need a firmware
update and if so, will update them, and only then will download the changes
you have made to the relevant units.
Compare/Verify instructs the system to compare the configuration of the
relevant units as opposed to the configuration as shown in the file as it is at
present (it relates to the open Excel file, and not the file saved on disk).
relevant units as opposed to the configuration as shown in the file as it is at
present (it relates to the open Excel file, and not the file saved on disk).
Verify Hardware: Not for customer use.
Line: Indicates for which line you are making configuration changes. This affects any
changes you make using the Configure Unit or HBS Batch Configuration buttons.
changes you make using the Configure Unit or HBS Batch Configuration buttons.
Configure Unit:Click to open the Configurator dialog box. This enables you to configure
individual units, one at a time. The line shown is determined by the value in
the Line window. See
the Line window. See
About...
Click to open a window showing the software version of the Configurator
application.
application.
Protect
Click to protect the Configurator file from being changed.
Unprotect
Click to allow the Configurator file to be changed. Password: psfiberinmotion
HBS Batch Configuration:
For Regualtor Approval Only