Radwin Ltd. RW2054 User Manual

RADWIN 1000/2000/5000 User ManualVersion  2.5.30p4

B-4

Figure B-1: Example for connecting the alarm connector

Note

• Use an external current limit resistor to limit the current at the output 

relays to 1 Ampere. Such resistor is not required if the equipment 
connected to the IDU supports current limiting to 1 Amp.

• The voltage of the input alarm must be within the range of -10 to -50 

VDC.

Table B-4: Terminal Block 3-pin -48VDC

+

Right

Chassis

Center

–

Left