Radwin Ltd. WINLINK User Manual
AirMux-104 Installation and Operation Manual
Chapter 4 Operation
Managing AirMux-104
4-5
Figure 4-3. Communication Preferences Dialog Box
Selecting Configuration Parameters
You can set the AirMux-104 configuration parameters via Configure Link dialog
box.
box.
AirMux Manager also provides the Configure RT dialog box (Configure > Configure
RT), which is used to configure only the local AirMux-104 unit (the one that is
connected to the management station).
RT), which is used to configure only the local AirMux-104 unit (the one that is
connected to the management station).
To change link configuration parameters:
1. In the Main menu, click Configure Link.
1. In the Main menu, click Configure Link.
The Configure Link dialog box appears (see
2. In the Configure Link dialog box, click the Radio tab and enter a new link
name, and/or radio channel value, if necessary.
3. Click the IP tab, and enter new IP parameters of the local and/or remote
devices, if necessary.
4. Click the Services tab, and change Ethernet and/or E1 parameters, if
necessary.
5. Once you finish changing configuration parameters, click Apply.
Both AirMux-104s are automatically reset (initially remote unit, then the
local one).
local one).
Note