G-Tek Electronics Corporation BTH101 User Manual

 

4

while.  

.  

Now that the devices are paired, you will not need to repeat the pairing process in future use as long as 

you are using the same headset. 

While you are wearing BTH-101, there are different ways to make a call. 

1.  Ensure that your headset is in standby mode and slide the Magic switch to the right line. 

2.  Briefly press on the button to “activate” the headset. Now the indication light is lit still. 

3.  Use the phone keypads to dial the numbers. 

4.  Press the ‘Send’ key on the phone. 

* If your call is not answered, you must end the call as described in Ending a call. 

If your mobile phone supports voice dialing, you can use this feature with the headset.   

1.  Ensure that your headset is in standby mode and slide the Magic switch to the right line. 

2.  Ensure that the voice dialing on your mobile phone is enabled. 

3.  Briefly press on the button to “activate” the headset. Now the indication light is lit still and you can 

also hear a faint background noise as well. 

4.  Speak out the voice tag. 

5.  The phone will automatically dial your voice tag. 

6.  When connected you are free to talk normally. 

* If your call is not answered, you must end the call as described in Ending a call. 

Remark：We recommend that you record all the voice tags through BTH-101 to “train” your phone for 

the voice recognition with BTH-101. 

 

To end a call： 

1.  Use the key(s) as specified by your phone manufacturer. 

2.  Or you can press the “talk” button on the headset. The indication light on the headset should now 

resume to the standby mode. 

Important：It is strongly suggested that you must always remember to end calls as above described, 

otherwise, your batteries will run out quickly since BTH-101 will remain in active mode meaning the 

headset is in use (see Understanding the BTH-101 indication lights). 

Either by pressing the phone keypad or talk button on the headset can answer an incoming call. While 

talking the indication light will flashes every second showing that the headset is in use. 

Briefly press the talk button then talk.