CipherLab Co. Ltd. 9600 User Manual
16
9600 Mobile Computer
Reference Manual
1.1.1 UNDERSTANDING THE BATTERY ICONS
The battery pack is the only power source for the TERMINAL to work. It also charges the
backup battery on the main board so that the data stored in SRAM can be retained
backup battery on the main board so that the data stored in SRAM can be retained
properly. Therefore, when the main battery charge goes low, you need to replace the
battery pack with a charged one or charge it as soon as possible. Most of all, you should
battery pack with a charged one or charge it as soon as possible. Most of all, you should
backup important data on a regular basis.
By looking at the battery icon, you can tell battery charge remaining in the main
By looking at the battery icon, you can tell battery charge remaining in the main
battery – the higher the green level, the more power in the main battery. Double-tap a
battery icon so that you can quickly access the [Power Properties] dialog box.
battery icon so that you can quickly access the [Power Properties] dialog box.
Battery Icons Description
External power source is connected and main battery is charging
External power source is connected but main battery needs no charging
Main battery level 100% ~ 80%
Main battery level 79% ~ 60%
Main battery level 59% ~ 40%
Main battery level 39% ~ 31%
Main battery charge becomes low (30% ~ 15%) and needs charging
Main battery charge becomes very low (14% ~) and needs charging immediately
Backup battery charge becomes low and needs charging.
Backup battery charge becomes very low and needs charging immediately.
Warning:
Data loss may occur with SRAM during low battery condition. Always save
data before running out of power or keep a fresh battery for replacement.
data before running out of power or keep a fresh battery for replacement.
1.1.2 POWER MANAGEMENT
For any portable device, power management is a critical issue especially when you are on
the road. Below are some tips to help you save battery power.
Warning:
the road. Below are some tips to help you save battery power.
Warning:
Using backlight, wireless connectivity, and peripherals while on battery
power will substantially reduce battery power.
power will substantially reduce battery power.
Bring a second battery pack on the road.
Stop wireless connectivity, Bluetooth, 802.11b/g or GPRS that is not in use.
Go to Start | Settings | Control Panel and double-tap the Display icon. Refer to
1.4.1 Adjusting the Backlight
.
Go to Start | Settings | Control Panel and double-tap the Power icon. (below)
1. In the Battery tab (left below), you can always monitor the charging status.