Xplore Technologies Corp of America M1200T001 User Manual
Chapter
2 Motion M1200 Tablet PC Hardware Components
Motion Computing M1200 Tablet PC User Guide 17
NOTE: For information about installing additional
memory upgrade modules, see Chapter 4 of this User
Guide or the Installation Card packaged with
the upgrade module.
memory upgrade modules, see Chapter 4 of this User
Guide or the Installation Card packaged with
the upgrade module.
The following configurations are supported:
PC Card Slot
The PC card slot, located on the Power Switch side of the Tablet PC, holds
one Type-II PC Card for networking, memory expansion, or accessory
connection.
one Type-II PC Card for networking, memory expansion, or accessory
connection.
1. To install the PC card, insert it label-side up.
2. To remove the PC card, push the button next to the slot until it pops
2. To remove the PC card, push the button next to the slot until it pops
out, then push it again to eject the card.
NOTE: The Tablet PC ships with a plastic blank in the PC Card slot. When the
slot isn’t in use, leave the plastic blank in place.
slot isn’t in use, leave the plastic blank in place.
Mini PCI Card (Wireless)
The Tablet PC is designed to accept a mini-PCI card for wireless
communications.
communications.
NOTE: Most Motion M1200 Tablet PCs ship with an 802.11b mini-PCI
card installed.
card installed.
For information about wireless operations, see Chapter 4 of this User Guide.
Table 2-5
Supported Memory Configurations
Slot A
Slot B
Total Memory
256MB
256MB
512MB
512MB
768MB
512MB
256MB
768MB
512MB
1GB