Xplore Technologies Corp of America M1200T001 User Manual

Chapter 4  Using Your Motion M1200 Tablet PC

Motion Computing M1200 Tablet PC User Guide 36

You can adjust the brightness level of the Motion M1200 display. 

•

From the Motion Dashboard

1. Open the Motion Dash-

board.

2. Adjust the desired bright-

ness level on the 

Display 

Brightness slider.

•

From the Tablet and Pen Settings Window

1. Double-tap the Tablet and Pen Settings icon in the Sys-

tem Tray, located in the lower right-hand corner of the 
display window. Or, go to the Control Panel and select 
the Tablet and Pen Settings icon. This opens the Tablet 
and Pen settings window.

2. Tap the Display tab. 
3. Adjust the Brightness slider at the bottom of this window. You can 

have a different setting when running on AC power versus battery.

You can operate the Tablet PC from external power through the Motion M-
Series AC Adapter. This adapter was designed for the Tablet PC and should 
only be used with the Tablet PC. Other accessories may have their own 
power adapters. 

CAUTION: Before you plug an AC adapter into the Tablet PC or into an 
accessory, make sure you are using the correct AC power adapter (the 
one that came with the Tablet PC or the accessory). The Tablet PC has 
an identifying label attached to the cord of its AC power Adapter. Leave 
this label attached to ensure you always connect this AC power Adapter 
only to the Tablet PC. If you connect this adapter to an accessory, you 
may damage the accessory.

To check the battery power, you can move the Pen over the 
Power/Battery icon on the System Tray at the bottom-right 
corner of the Tablet PC display. This shows you the number of 
hours of battery power and the percentage of battery power left. 
(The blue area on the battery icon shrinks as the battery runs down.)