Boston Scientific Neuromodulation Corporation PSC5210W User Manual
Patient Remote Control
43
4. To continue with a Rate adjustment, press and hold the Area but-
ton from any Pulse Width Area screen to navigate to Rate Area 1.
5. As necessary, press the
C
button normally to cycle to the area
you wish to adjust.
6. When the desired area screen is displayed, press S or T to
increase or decrease the Rate.
To Access the Restore Option
1. Press and hold
P
to reach Restore Program 1.
2. If necessary, press the
P
button again (normal press) to cycle
through the programs and select the program to be restored.
3. Press S to restore the last clinic-programmed settings.
Device Linking
A Remote Control can communicate with only one Stimulator at a
time. This prevents the Remote Control from accidentally controlling
an unintended device. For this reason, the initial step in the linking
process involves the Remote Control identifying, by telemetry, the
intended Stimulator for communication. The second step in establish-
ing the link depends on:
time. This prevents the Remote Control from accidentally controlling
an unintended device. For this reason, the initial step in the linking
process involves the Remote Control identifying, by telemetry, the
intended Stimulator for communication. The second step in establish-
ing the link depends on:
• Whether the Stimulator is an External Trial Stimulator (ETS) or
an IPG;