Contour Design VHR4160 Leaflet
Camera’s shown to illustrate accessory use only. Camera not included with accessory purchase.
CONNECT VIEW
Contour’s Connect View card is an incredibly
fast, easy, and inexpensive way to revolutionise
the way you record video on your ContourGPS
camera. It turns your iPhone, iPod Touch or
iPad’s screen into a real-time viewfinder for
your video camera. Just plug this card into your
camera, and it sends a Bluetooth signal to your
iDevice instantly. Android O/S support coming in
July 2011.
fast, easy, and inexpensive way to revolutionise
the way you record video on your ContourGPS
camera. It turns your iPhone, iPod Touch or
iPad’s screen into a real-time viewfinder for
your video camera. Just plug this card into your
camera, and it sends a Bluetooth signal to your
iDevice instantly. Android O/S support coming in
July 2011.
You can adjust your camera angle without ever taking it off your helmet,
and you can see how the footage looks from the camera position by
looking at your phone screen. Line up your shot, adjust your audio/
video/lighting settings, with the free Contour App available from iTunes
or the App Store. Connect View card is included with Contour+
and you can see how the footage looks from the camera position by
looking at your phone screen. Line up your shot, adjust your audio/
video/lighting settings, with the free Contour App available from iTunes
or the App Store. Connect View card is included with Contour+
VHR4000
WINDSDCREEN MOUNT
A powerful suction cup mount attaches to
any windscreen or car body. Place the mount
where you want it to live, press a button, slide
a switch, and voilà! Your Windscreen Mount is
now locked and loaded.
any windscreen or car body. Place the mount
where you want it to live, press a button, slide
a switch, and voilà! Your Windscreen Mount is
now locked and loaded.
VHR2800
GOGGLE STRAP MOUNT
The Goggle Strap Mount wraps around a standard
goggle strap and rests comfortably against your
head on a soft pad. Slide your Contour onto the
patent-pending TRail™ Mounting System and
you are ready to go. This mount lets your camera
look right where you’re looking.
goggle strap and rests comfortably against your
head on a soft pad. Slide your Contour onto the
patent-pending TRail™ Mounting System and
you are ready to go. This mount lets your camera
look right where you’re looking.
VHR2650
MOUNT ADHESIVE
Replacement Adhesive Pads to remount your
Contour Flat Surface Mount. Works best on flat,
non-porous, clean surfaces.
Contour Flat Surface Mount. Works best on flat,
non-porous, clean surfaces.
VHR2250
VHR2550
VENTED HELMET MOUNT
Find your mounting location, slide the straps
through, and cinch them down. Slide your
Contour Wearable Camcorder on the rails and
you are ready to go. Tilt the camera forward or
back to find the best angle.
through, and cinch them down. Slide your
Contour Wearable Camcorder on the rails and
you are ready to go. Tilt the camera forward or
back to find the best angle.
PROFILE MOUNT
The Profile Mount was built to place a fixed
camera within millimeters from the surface
that you apply it to. The low-profile design
enhances the already minute size of the Contour
video camera, making the Worlds Smallest
HD Camera even more compact. Its 3M base
adheres best to flat surfaces, but will conform
to curves of helmets and fairings for a variety of
applications. Mounts come in a 2 pack.
camera within millimeters from the surface
that you apply it to. The low-profile design
enhances the already minute size of the Contour
video camera, making the Worlds Smallest
HD Camera even more compact. Its 3M base
adheres best to flat surfaces, but will conform
to curves of helmets and fairings for a variety of
applications. Mounts come in a 2 pack.
Left - VHR4110
Right - VHR4160
ROLL BAR MOUNT
The Roll Bar Mount, co-developed by Contour
and RAM, was built to attach your Contour to
motorsports roll-bars. Using a double socket
arm and ball design it adjusts by turning a
central wing nut that gives you almost infinite
rotation. The marine grade aluminium mount
attaches securely and easily via a bonanza
strap to round bars from 2” to 3” in diameter.
and RAM, was built to attach your Contour to
motorsports roll-bars. Using a double socket
arm and ball design it adjusts by turning a
central wing nut that gives you almost infinite
rotation. The marine grade aluminium mount
attaches securely and easily via a bonanza
strap to round bars from 2” to 3” in diameter.
VHR3800
RAM MOUNTS
The RAM Single, Double and Triple suction
mounts are designed with a 1” diameter
patented rubber coated ball and socket system
that has adjustment points at both ends of the
double socket arm; allowing for almost infinite
adjustment and perfect mounting angles.
Simply attach the suction cup base to any flat,
non-porous surface for an easy and safe way
to view your camera. High quality materials
ensure your Contour camera is safe, secure,
and within easy reach.
mounts are designed with a 1” diameter
patented rubber coated ball and socket system
that has adjustment points at both ends of the
double socket arm; allowing for almost infinite
adjustment and perfect mounting angles.
Simply attach the suction cup base to any flat,
non-porous surface for an easy and safe way
to view your camera. High quality materials
ensure your Contour camera is safe, secure,
and within easy reach.
RAM’s patented design also dampens shock
and vibration helping to extend the life of your
Contour camera. The universal camera and
camcorder base consists of a 1” (25.4mm)
diameter rubber coated ball, connected to
a 1/4-20 camera thread. The male thread
connects to either the Contour Universal Mount
Adaptor (VHR3100) or the Contour Waterproof
cases. It also fits any standard camcorder
female thread, found on almost every type of
camera.
and vibration helping to extend the life of your
Contour camera. The universal camera and
camcorder base consists of a 1” (25.4mm)
diameter rubber coated ball, connected to
a 1/4-20 camera thread. The male thread
connects to either the Contour Universal Mount
Adaptor (VHR3100) or the Contour Waterproof
cases. It also fits any standard camcorder
female thread, found on almost every type of
camera.
RAM-SM01
RAM-SM02
RAM-SM03
FLAT SURFACE MOUNT
The Flat Surface Mount is ideal for non-vented
helmets and flat surfaces. The mount uses an
all-weatherproof removable adhesive pad that
adheres to any flat surface.
helmets and flat surfaces. The mount uses an
all-weatherproof removable adhesive pad that
adheres to any flat surface.
VHR2150
LENS KIT
The Lens Kit is a little TLC for your Contour
Wearable Camcorder. It includes extra lens
covers and even a replacement Lens Ring for
when you put it through the ringer. And even
better, with the Lens Adaptor Ring, you can
now screw on a standard 37mm lens filter to
get the perfect shot in the toughest lighting
conditions. Compatible with ContourHD and
ContourGPS only.
Wearable Camcorder. It includes extra lens
covers and even a replacement Lens Ring for
when you put it through the ringer. And even
better, with the Lens Adaptor Ring, you can
now screw on a standard 37mm lens filter to
get the perfect shot in the toughest lighting
conditions. Compatible with ContourHD and
ContourGPS only.
VHR3400
UNIVERSAL MOUNT ADAPTER
Now your Contour Wearable Camcorder is
ideal for your favorite camera mounts. Use the
¼”-20 Universal Mount Adapter to attach your
camera to any mounts or tripods that have
their own male ¼”-20 screw.
ideal for your favorite camera mounts. Use the
¼”-20 Universal Mount Adapter to attach your
camera to any mounts or tripods that have
their own male ¼”-20 screw.
VHR3100
XL BIKE MOUNT
The XL Bike Mount is built with a dual screw
enclosure system so you can clamp securely
on to a variety of bar sizes. The twist lock
adjustment easily helps you achieve the angle
that you are looking for and the TRail system
helps you mount and remove your camera
quickly and easily.
enclosure system so you can clamp securely
on to a variety of bar sizes. The twist lock
adjustment easily helps you achieve the angle
that you are looking for and the TRail system
helps you mount and remove your camera
quickly and easily.
VHR2775
PICATINNY MOUNT
The Contour Picatinny Mount mounts your
Contour camera on tactical weapon platforms
or other devices that use a standard MIL-
STD-1913 Picatinny/Weaver rail. This mount is
built tough with reinforced polymer. It mounts
securely and easily to the rail via thumbscrew.
Contour camera on tactical weapon platforms
or other devices that use a standard MIL-
STD-1913 Picatinny/Weaver rail. This mount is
built tough with reinforced polymer. It mounts
securely and easily to the rail via thumbscrew.
VHR3900
FLYMOUNT
The Flymount offers the perfect solution for
action sports mounted imagery. Ultra strong,
compact & lightweight; the Flymount is perfect
for use on bikes, windsurf rigs, hang-gliders,
ultra-lights, kites, sailboats, quads and most
other adventure sports equipment. Made
from high grade reinforced nylon and marine
grade stainless steel, the Flymount won’t
deteriorate in salt water, neither will it suffer
under impact.
action sports mounted imagery. Ultra strong,
compact & lightweight; the Flymount is perfect
for use on bikes, windsurf rigs, hang-gliders,
ultra-lights, kites, sailboats, quads and most
other adventure sports equipment. Made
from high grade reinforced nylon and marine
grade stainless steel, the Flymount won’t
deteriorate in salt water, neither will it suffer
under impact.
Flymount works perfectly with the Contour
range of cameras when coupled with the
Contour Universal Mount Adaptor (VHR3100) or
Contour Waterproof Cases.
range of cameras when coupled with the
Contour Universal Mount Adaptor (VHR3100) or
Contour Waterproof Cases.
FLYMOUNT
Shown with Waterproof Case
SURF-WAKE MOUNT
Specifically tailored to meet the needs of
demanding watersports, featuring a low profile
design and a full rotating arm so the camera
can move 360 degrees. Its flat base uses a
waterproof adhesive solution that curates to the
board, ensuring you don’t lose your mount or your
camera. Separate Wake Board mount included.
Use in conjunction with waterproof case.
demanding watersports, featuring a low profile
design and a full rotating arm so the camera
can move 360 degrees. Its flat base uses a
waterproof adhesive solution that curates to the
board, ensuring you don’t lose your mount or your
camera. Separate Wake Board mount included.
Use in conjunction with waterproof case.
VHR3500
WATERPROOF CASES
The waterproof cases fit your Contour like
a hard plastic glove. Waterproof to up to 60
metres* and positively buoyant, so your
Contour will float! These cases are available
for the ContourHD (# VHR3300), ContourGPS
(# VHR3320) and Contour+ (# VHR3325).
a hard plastic glove. Waterproof to up to 60
metres* and positively buoyant, so your
Contour will float! These cases are available
for the ContourHD (# VHR3300), ContourGPS
(# VHR3320) and Contour+ (# VHR3325).
VHR3300
* VHR3320